Citric acid

Glucose Liquid also called Glucose syrup is a food syrup, made from the hydrolysis of starch. Maize (corn) is commonly used, in which case the syrup is called “corn syrup”, but glucose syrup is also made from other starch crops, including potatoes, wheat, barley, rice and cassava.

Glucose syrup containing over 90% glucose is used in industrial fermentation, but syrups used in confectionery manufacture contain varying amounts of glucose, maltose and higher oligosaccharides, depending on the grade, and can typically contain 10% to 43% glucose.

Glucose syrup is used in foods to soften texture, add volume, prevent crystallization of sugar, and enhance flavor. By converting some of the glucose in corn syrup into fructose (using an enzymatic process), a sweeter product, high fructose corn syrup can be produced.

Its major uses in commercially prepared foods are as a thickener, sweetener, and humectant (an ingredient that retains moisture and thus maintains a food’s freshness). Glucose syrup is also widely used in the manufacture of a variety of candy products.

Methanol, also known as methyl alcohol, wood alcohol, wood naphtha or wood spirits, is a chemical produced in a catalytic industrial process directly from carbon monoxide, carbon dioxide, and hydrogen.

Methanol is the simplest alcohol. It is a light, volatile, colorless and flammable liquid with a distinctive odor very similar to that of ethanol (drinking alcohol). However, unlike ethanol, methanol is highly toxic and unfit for consumption.

At room temperature, it is a polar liquid, and is used as an antifreeze, solvent, fuel, and as a denaturant for ethanol. It is also used for producing biodiesel via transesterification reaction.

Because of its toxic properties, methanol is frequently used as a denaturant additive for ethanol manufactured for industrial uses. The largest use of methanol by far is in making other chemicals. About 40% of methanol is converted to formaldehyde, and from there into products as diverse as plastics, plywood, paints, explosives, and permanent press textiles.

Other chemical derivatives of methanol include dimethyl ether, which has replaced chlorofluorocarbons as an aerosol spray propellant, and acetic acid. Dimethyl ether (DME) also can be blended with liquefied petroleum gas (LPG) for home heating and cooking, and can be used as a diesel replacement for transportation fuel.

Methanol is used as a solvent, and as an antifreeze in pipelines and windshield washer fluid. It is also useful as an energy carrier. It is easier to store than hydrogen, burns cleaner than fossil fuels, and decomposes to water and carbon dioxide if spilled.

paint preservatives methylisothiazolinone

Propylene Glycol is a colorless viscous liquid with a faintly sweet smell. It is hygroscopic and miscible with water, acetone and chlorofoam.

It is use as moisturizer, solvent, humectants, cooling agent for beer and wine, carrier in fragrance oils, antifreeze, photographic chemical solvent, in smoke machine to produce artificial smoke, in cryonics, to treat livestock ketosis, main ingredient in deodorant sticks, aircraft deicer, and in UV black light tattoo ink.

It is available as a propylene glycol USP.

Linear Low Density Polyethylene (LLDPE or LDPE) and High Density Polyethylene (HDPE) are two major categories of Polyethylene (PE) or polythene that are the most common plastic. They are primarily use is in packaging (i.e plastic bag, plastic films, geomembranes, containers including bottles etc.). These plastic polymers are thermoplastic polymer consisting of long hydrocarbon chains. Polyethylene is also classified into several different sub-categories based mostly on its density and branching.

The two major categories are available from Turraco in diferent variations.

High-density polyethylene (HDPE) is defined by a density of greater or equal to 0.941 g/cm3. HDPE has a low degree of branching and thus low intermolecular forces and tensile strength. It is used in products and packaging such as milk jugs, detergent bottles, butter tubs, garbage containers and water pipes. One third of all toys are manufactured from HDPE.

Linear low-density polyethylene (LLDPE) is defined by a density range of 0.915–0.925 g/cm3. LLDPE has higher tensile strength than LDPE, it exhibits higher impact and puncture resistance than LDPE. It is used in packaging, particularly film for bags and sheets.

In copolymerization, ethylene can also be copolymerized with a wide range of other monomers and ionic composition that creates ionized free radicals. Common examples include vinyl acetate (the resulting product is ethylene-vinyl acetate copolymer, or EVA, widely used in athletic-shoe sole foams) and a variety of acrylates. Applications of acrylic copolymer include packaging and sporting goods, and superplasticizer, used for cement production.

Butyl glycol (also known as BG, 2-butoxyethanol, glycol monobutyl ether and ethylene glycol monobutyl ether) is a clear, colourless, oily liquid with a unique yet mild odour and has the formula C₆H₁₄O₂.  Butylglycol is miscible with water and common organic solvents. It has been produced commercially for over half a century where it is most commonly used in the paint industry.

Glycerin and rosewater is a cooling, refreshing beautifier that softens and moisturises the skin. Lanolin-free and dermatologically tested. This product is formulated and produced by boots skin care specialists from traditional ingredients

Sodium laureth sulfate, or sodium lauryl ether sulfate (SLES), is an anionic detergent and surfactant found in many personal care products (soaps, shampoos, toothpaste etc.).

SLES is an inexpensive and very effective foaming agent. It behaves similarly to soap

used for its gelling or thickening properties in many sectors of agri-food applications such as soups, delicatessen meats, sauces, pastries, coatings, pastas, creams.

Stearic Acid is 100% derived from vegetable fats and oils. It is available in different physical forms such as Powder or Beads and various grades.

1. Stearic Acid 50 Powder FF, RSPO MB
2. Stearic Acid 50 Powder, RSPO MB
3. Stearic Acid 65 Powder, RSPO MB
4. Stearic Acid 70 Powder, RSPO MB
5. Stearic Acid 95 Powder, RSPO MB
6. Stearic Acid 50 Beads
7. Stearic Acid 38 Beads
8. Stearic Acid 65 Beads
9. Stearic Acid 70 Beads

Colour : White or yellowish-white

Appearance: Powder

C18, %: 40-60

Material Compliance: USP / NF / EP and BP

Standard Packing: In 25kg Paper Carton with HDPE Bag