Butyl glycol

Dextrose commonly called Glucose is widely used as an energy supplement for the body. The chemical D-glucose is sometimes referred to as dextrose. Glucose is produced commercially via the enzymatic hydrolysis of starch, mostly available in monohydrate form. Many crops can be used as the source of getting dextrose starch. Crops like Maize, rice, wheat, cassava, corn husk and sago are all used in various parts of the world. It is mostly available in both monohydrate and anhydrous form.

Most commercial glucose occurs as a component of invert sugar, a roughly 1:1 mixture of glucose and fructose. Glucose has approximately 75% the sweetness of sucrose (table sugar)

Silicone oil is any liquid polymerized siloxane with organic side chains. The most important member is polydimethylsiloxane. These polymers are of commercial interest because of their relatively high thermal stability and their lubricating properties.

Silicone oils are primarily used as lubricants, thermic fluid oils or hydraulic fluids. They are excellent electrical insulators, and, unlike their carbon analogues, are non-flammable.

Their temperature-stability and good heat-transfer characteristics make them widely used in laboratories for heating baths (“oil baths”) placed on top of hotplate stirrers, as well as in freeze-dryers as refrigerants. Silicone oil is also commonly used as the working fluid in dashpots, wet type transformers, diffusion pumps and in oil-filled heaters.

Some silicone oils, such as simethicone, are potent anti-foaming agents due to their low surface tension. They are used in industrial applications such as distillation or fermentation where excessive amounts of foam can be problematic. They are sometimes added to cooking oils to prevent excessive frothing during deep frying. Silicone oils used as lubricants can be inadvertent defoamers (contaminants) in processes where foam is desired, such as in the manufacture of polyurethane foam.

Caustic Potash, also known as potassium hydroxide and KOH are a white odorless solid.

It is used commonly in glass manufacturing, cleaners, process chemicals, petroleum industry and food processing.

used for its gelling or thickening properties in many sectors of agri-food applications such as soups, delicatessen meats, sauces, pastries, coatings, pastas, creams.

Short oil alkyd resins are those that have an oil content less than 40%. Their main characteristic is the excellent drying time. They are soluble almost exclusively in strong solvents like xylene or toluene and have very limited compatibility with aliphatic solvents. Short oil alkyd resins are mainly used in:

1. Industrial use paints
2. Road-marking paints
3. Anti-corrosive primers
4. Applications that need a good drying time

Benzalkonium Chloride is raw material used in production of disinfectants. It is very effective against bacteria and viruses .It is packed in 25kg bag.

Description: Low acrylamide, non-paraben, aqueous, cationic copolymer developed for improved compatibility and clarity in anionic surfactant systems. Viscosity 7,500-15,000 mPas. Solids: 8-10%. pH value 3.5-4.5. Clear colorless liquid, characteristic faint odor. Soluble in water, glycerin and propylene glycol.

CAS: 26590-05-6

INCI Name: Polyquaternium-7

Benefits:

• Imparts a smooth velvety feel and improves slip and moisturization in skin and hair care products
• Improves wet combing and detangling of hair due to its.anti-static properties
• Strong antistatic properties are ideal for use in anhydrous products
• Provides rich, creamy foam to shampoos and shower gels
• No build-up effect

Sodium laureth sulfate, or sodium lauryl ether sulfate (SLES), is an anionic detergent and surfactant found in many personal care products (soaps, shampoos, toothpaste etc.).

SLES is an inexpensive and very effective foaming agent. It behaves similarly to soap

Linear Low Density Polyethylene (LLDPE or LDPE) and High Density Polyethylene (HDPE) are two major categories of Polyethylene (PE) or polythene that are the most common plastic. They are primarily use is in packaging (i.e plastic bag, plastic films, geomembranes, containers including bottles etc.). These plastic polymers are thermoplastic polymer consisting of long hydrocarbon chains. Polyethylene is also classified into several different sub-categories based mostly on its density and branching.

The two major categories are available from Turraco in diferent variations.

High-density polyethylene (HDPE) is defined by a density of greater or equal to 0.941 g/cm3. HDPE has a low degree of branching and thus low intermolecular forces and tensile strength. It is used in products and packaging such as milk jugs, detergent bottles, butter tubs, garbage containers and water pipes. One third of all toys are manufactured from HDPE.

Linear low-density polyethylene (LLDPE) is defined by a density range of 0.915–0.925 g/cm3. LLDPE has higher tensile strength than LDPE, it exhibits higher impact and puncture resistance than LDPE. It is used in packaging, particularly film for bags and sheets.

In copolymerization, ethylene can also be copolymerized with a wide range of other monomers and ionic composition that creates ionized free radicals. Common examples include vinyl acetate (the resulting product is ethylene-vinyl acetate copolymer, or EVA, widely used in athletic-shoe sole foams) and a variety of acrylates. Applications of acrylic copolymer include packaging and sporting goods, and superplasticizer, used for cement production.

Methanol, also known as methyl alcohol, wood alcohol, wood naphtha or wood spirits, is a chemical produced in a catalytic industrial process directly from carbon monoxide, carbon dioxide, and hydrogen.

Methanol is the simplest alcohol. It is a light, volatile, colorless and flammable liquid with a distinctive odor very similar to that of ethanol (drinking alcohol). However, unlike ethanol, methanol is highly toxic and unfit for consumption.

At room temperature, it is a polar liquid, and is used as an antifreeze, solvent, fuel, and as a denaturant for ethanol. It is also used for producing biodiesel via transesterification reaction.

Because of its toxic properties, methanol is frequently used as a denaturant additive for ethanol manufactured for industrial uses. The largest use of methanol by far is in making other chemicals. About 40% of methanol is converted to formaldehyde, and from there into products as diverse as plastics, plywood, paints, explosives, and permanent press textiles.

Other chemical derivatives of methanol include dimethyl ether, which has replaced chlorofluorocarbons as an aerosol spray propellant, and acetic acid. Dimethyl ether (DME) also can be blended with liquefied petroleum gas (LPG) for home heating and cooking, and can be used as a diesel replacement for transportation fuel.

Methanol is used as a solvent, and as an antifreeze in pipelines and windshield washer fluid. It is also useful as an energy carrier. It is easier to store than hydrogen, burns cleaner than fossil fuels, and decomposes to water and carbon dioxide if spilled.